UTOUCH-21s Fiber Polishing Machine

UTOUCH-21s Fiber Polishing Machine
产品编号: UTOUCH-21s Fiber Polishing Machine 产品名称: UTOUCH-21s Fiber Polishing Machine


01.The machine can polish a certain amount ferrule or connector in a short time (Different polishing fixture is different in polishing ferrule or connector)
02. Simple operation and maintenance 
03. Be suitable in LC/UPC, LC/APC, FC/UPC, FC/APC, SC/UPC, SC/APC, ST/UPC, MTRJ, MT/PC, MT/APC and E2000 and other types of connector

04. Speed regulation control, speed selection scope is 30 ~ 160 RPM. Slow start function.
05. The polishing time can be reduced to the original by 1/2
06. Load ability: Allow more of 48 PCS fiber optic connectors
07. The password keeps all polishing parameter not to modify, make sure you have the correct polishing process will not be changed.
08. The Full-Color Touch Screen Programmable Fiber Polishing Machine using heat treatment all materials, and long service life
09. Polishing process by microcomputer control, may realize the polishing time and process more be precise.
10. Double insurance TN-S grounding system and leakage protection switch, to an extreme protect operator
11. Unique compensation setting function, it not only strictly control polishing film costs least, but also maintain high quality consistency.




Item        Index
Power source  
Voltage : Frequency AC 110-120V: 50Hz/60Hz Or AC 220-240V: 50Hz
Power waste 80VA
Drive Units  
Big motor (rpm) 15W,Including transmission
Small motor (rpm) 6 W,Including transmission
Fan φ90mm
Operation unit  
Control time Set the growth time of 0.1mins ,maximum time is 3min the middle button is power switch, right button is the start switch
Power switch
Timing switch
Pressure unit      4 coil spring
Pressure way
The least grinding ferrule abrasive sheet                     level grinding by polishing pad and polishing by PC connector 1 - 10 connector
Outer diameter:127mm                                       
Glass pad
Synthetic   rubber pad
Polish PC connector                                                        Four-step, 1.4 to 2.4 minutes
Polish APC connector Five-step, 3.0 to 5.0 minutes
Dimension W230 × D230 × H350 mm
Weight 30 kg