Microcomputer-type Cable Tensile Testing Machine
The machine is a microcomputer-based tensile testing machine, mainly by the electrical and mechanical two parts; mechanical part of the electrical part of the motor as the driving force, the use of motor positive and negative, through the worm gear and reducer speed to test the speed required, Then by the screw drive, driven by the board moves up and down with the fixture to achieve the fixture of the tension and compression process. After the specimen has been stretched, compressed, torn or otherwise destroyed, the tensile force, pressure value, tearing force, displacement or other force values can be directly read out from the display to obtain the desired physical properties of the specimen .
Technical Parameters:
Capacity | 50KG 100KG 200KG 500KG (according to customer's own choice) |
Speed | 50～300mm/min arbitrary regulation |
Transmission control | hollow cast aluminum worm gear |
Power | single-phase 220V 50HZ |
Fixture | plane fixture |
Protection device | leakage short circuit protection, upper and lower limit position protection, load overload protection |
Extension measuring | Japan Rhine encoder + ruler |
Monitor | LCD monitor |
printing method | Automatically print the report (Chinese print), print the maximum test force value, the average, free to take points and each point of displacement, breakpoint ratio, date, etc. |
