Automatic Fiber Heat Stripper HK-S32C/R for stripping ribbon buffer 2 4 6 8 12 core 

Function description for temperature controller： 

1. Display with 0.56 four digital highlighted nixie tube. 

2. The upper and lower limits of temperature can be set. In heating mode (hot): start the relay when it is lower than the lower limit of temperature, and stop the relay when it is higher than the upper limit of temperature. Cold: start the relay when it is higher than the upper temperature limit, and stop the relay when it is lower than the lower temperature limit. 

3. With temperature error correction function, it can set positive and negative temperature error.

 4. The control range is 0-999 degrees. Display range - 200-1300 degrees 

5. The set parameters will not be lost after power failure, and will not be readjusted after power on again.