Multifiber Automatic Fiber Optic Interferometer

Multifiber Automatic Fiber Optic Interferometer
Item: Multifiber Automatic Fiber Optic Interferometer Product Name: Multifiber Automatic Fiber Optic Interferometer
Descriptions:

Specifications

 
Multifiber Interferometer is an automated non-contact interferometer designed for measuring the end face geometry of fiber optic 

 
Multifiber Interferometer is an automated non-contact interferometer designed for measuring the end face geometry of fiber optic connector including multifiber connectors, fiber arrays, single and PC/APC connectors. 
 
Specifically designed to measure the key 3D parameters of multifiber connectors, the WKMI-1 calculates the radius of curvature, fiber protrusion, angle of polish, differential fiber height and core dip on such connectors as MT, MT-RJ and MPO. The system has the additional ability to measure single fiber connectors for radius of curvature, apex offset, fiber height on FC, ST, SC, LC, and MU PC/APC type connectors. 
 
 
Key Features and Benefits
 
1.         Measures BOTH multi fiber and single fiber connectors
 
2.         Fast measurement – <0.4s for single fiber connectors, and <10s for multi fiber connectors
 
3.         FAST and PRECISE automatic focus – NO manual adjustments
 
4.         Specific unit is integrated into the chuck to improve the measurement efficiency.
 
5.         Precise data processing to ensure high accuracy of measurement results
 
6.         Accurate results even when measuring contaminated connector end face
 
7.         Perfect anti-vibration design with wonderful repeatability and reproducibility
 
8.         3D image and data fitting charts automatically generated
 
9.         View, print and automatically save data in EXCEL without leaving the program
 
10.       Wide range – measure multi fiber with quantity up to 72
 
11.       Easy PC APC conversion: no need tools or change fixtures
 

Specification:

 

Item

Measured Parameter

Range

Repeatability

Reproducibility

Multi-fiber

Radius of Curvature (X and Y)(mm)

3~∞

1%

3%

Angle (X and Y) (°)

0° / 8°

0.01

0.02

Fiber Height (um)

0~8

0.015

0.025

Measurement Time (s)

MT-12  10s

Single Fiber

Radius of Curvature (mm)

3~∞

0.1%

0.2%

Fiber Height (um)

-150~+150

1

2

Apex Offset (um)

0~500

0.2

1.5

APC Angle (°)

0~8

0.01

0.015

Measurement Time (s)

0.5s

Magnification

2X Objective

Resolution

2.6um

Light Source

Red and White Light Interferometric Modes

Power requirements

220V 50Hz


Back Homepage
在线客服