FSM-12S-C Fujikura FTTH Fiber Fusion Splicer

FSM-12S-C Fujikura FTTH Fiber Fusion Splicer
Item: FSM-12S-C Fujikura FTTH Fiber Fusion Splicer Product Name: FSM-12S-C Fujikura FTTH Fiber Fusion Splicer
Descriptions:

The revolutionary 12S-C compress field proven fixed v-groove and dual axis observation system into a palm size package.
Selectable 2 types of fiber setting methods, Sheath Clamp System or Fiber Holder System.
The contour is specially designed for splicing fibers in narrow space environment commonly faced by FTTH installers.

Features
Excellent for FTTx.
electable 2 types of fiber setting methods, Sheath Clamp System or Fiber Holder System.
World's smallest & lightest.
Superior mobility for aerial/confines space.
Fixed v-groove, dual-axis observation system.


Specifications

Applicable fibers Single / SMF (G.652/657), MMF (G.651), DSF (G.653), NZDSF (G.655)
Cladding dia. / Sheath dia. 125 μm / Up to 3mm with sheath clamp
Cleave length 5mm to 16mm
Splice mode / heating mode Total 100 splice modes / 30 heating modes
Typical splice loss 0.05dB (SM), 0.02dB (MM), 0.08dB (DS) and 0.08dB (NZDS) Measured by cut-back method relevant to ITU-T and IEC standards
Return loss >>60dB
Typical splice time 15sec SM AUTO
Typical tube heating time 30sec FP-03,coating dia.900μm
Splice result storage Last 2000 splices
Viewing methods / magnification 2 axis CMOS camera with 4.47” color LCD. 100X magnification.
Tension test 1.96 to 2.25N
Applicable protection sleeve 60mm, 40mm and Fujikura micro sleeves
No. of splice / heating per battery full charge*1 Typical 100 cycles with BTR-10
Electrode life 5000 splices
Size / weight 121W x 162D x 57H mm / 776g (including battery)
Operating condition Altitude : 0 to 5,000m above sea level, Wind : 15m/sec Temperature : -10 to 50deg C, Humidity : 0 to 95%RH, non-dew
Other features PC software upgrade / data management
Resistance tests*2 Shock : 76cm (30inch) bottom surface drop Dust : Exposure to dust (0.1 to 500μm dia. Alumina Silicate). Rain : H=10mm/hr for 10min

Back Homepage
在线客服